FS: 1996 Honda RS125 racebike **SOLD, Have fun Earl :)**

G-force Junkie · 12-28-2005, 08:19 PM

1996 Honda RS 125R all stock Dynorun by MCE racing at 38.4hp

Bottom end done by Kevin Murray MCE racing 7/17/03

Bottom end has 600 miles on it, top end is brand new, ready to run.

Complete set of jets

New chain, less than 100 miles.

3 spare cylinders & heads: 2 need replating, one almost brand new (less than 75 miles)

Aftershocks did the suspension re-valve and the heaviest I could get for a 200lb rider.

Set of unmounted rain tires

KLS tire warmers.

Marvic front wheel.

Freshly painted MRracing bodywork with air box. Extra upper and lower MRracing, need bodywork and paint but solid.

Sprockets front 14,15,16,17, rear 34,35,36,37,

John Hjelm rear sets the long ones 6mm I have the stock ones too.

Extra brake and clutch levers.

New front rotor

Rear stand

spare 95 crankcase right&left with crank still installed

Spare Expansion chamber & silencer

Lots of spare parts, odds and ends, etc.

I have all papers for work done. $3,000 firm

Mike

Earl · 01-05-2006, 10:26 AM

How do I get in touch with you?????

Please see your PM!!!!

SPEED · 01-05-2006, 12:58 PM

Quote:

Originally Posted by Earl

How do I get in touch with you?????

Please see your PM!!!!

PM sent with his number :thumbup

Earl · 01-05-2006, 01:05 PM

Quote:

Originally Posted by SPEED

Quote:

Originally Posted by Earl

How do I get in touch with you?????

Please see your PM!!!!

PM sent with his number :thumbup

Got it, thank you senor!

I'll give him a call! :happyb

Earl · 01-15-2006, 10:32 PM

Thanks Mike, the bike was stripped down to the frame already!

The bodywork was dropped off Sat AM for a new all Honda red paint job.

The frame, sub frame, swing arm, triples, and rear sets will be powder coated matte black. The wheels will be PCd gold.

The bike will be thoroughly gone thru with new black socket head bolts, waterproof grease, new bearings as required, etc. I'll repaint the exhaust pipe and clean things up.

It will look like a mini me MotoGP bike. :happyb Should be done by the 1st w/e in Feb.

Then I start my "Mother of All Tards" (MOAT) project!!! :thumbup This bike will blow your minds!!!!!

SPEED · 01-16-2006, 01:20 PM

Killer deal on this bike!! Hope to see some winning race reports Earl! :happyb

G-force Junkie · 01-17-2006, 07:01 PM

It sounds like it will look too good to race!

Earl · 01-19-2006, 02:39 PM

Quote:

Originally Posted by G-force Junkie

It sounds like it will look too good to race!

Looking good is half the battle!!! :laughing

I don't expect to do too well against the likes of Jay, Blair, and Melissa in the 125 GP class, but it'll sure be fun!

And, I'll look "marvelous" getting my azz handed to me! :thumbup

12-28-2005, 08:19 PM	#1
G-force Junkie Newbie Join Date: Jul 2004 Posts: 65 iTrader: (0) Rep Power: 5 (10)	FS: 1996 Honda RS125 racebike SOLD, Have fun Earl :) 1996 Honda RS 125R all stock Dynorun by MCE racing at 38.4hp Bottom end done by Kevin Murray MCE racing 7/17/03 Bottom end has 600 miles on it, top end is brand new, ready to run. Complete set of jets New chain, less than 100 miles. 3 spare cylinders & heads: 2 need replating, one almost brand new (less than 75 miles) Aftershocks did the suspension re-valve and the heaviest I could get for a 200lb rider. Set of unmounted rain tires KLS tire warmers. Marvic front wheel. Freshly painted MRracing bodywork with air box. Extra upper and lower MRracing, need bodywork and paint but solid. Sprockets front 14,15,16,17, rear 34,35,36,37, John Hjelm rear sets the long ones 6mm I have the stock ones too. Extra brake and clutch levers. New front rotor Rear stand spare 95 crankcase right&left with crank still installed Spare Expansion chamber & silencer Lots of spare parts, odds and ends, etc. I have all papers for work done. $3,000 firm Mike

01-05-2006, 10:26 AM	#2
Earl Squid Join Date: Jan 2005 Posts: 245 iTrader: (0) Rep Power: 4 (10)	How do I get in touch with you????? Please see your PM!!!! __________________ Life is either a daring adventure or nothing, so learn how to ride you lazy bastard!

01-15-2006, 10:32 PM	#5
Earl Squid Join Date: Jan 2005 Posts: 245 iTrader: (0) Rep Power: 4 (10)	Thanks Mike, the bike was stripped down to the frame already! The bodywork was dropped off Sat AM for a new all Honda red paint job. The frame, sub frame, swing arm, triples, and rear sets will be powder coated matte black. The wheels will be PCd gold. The bike will be thoroughly gone thru with new black socket head bolts, waterproof grease, new bearings as required, etc. I'll repaint the exhaust pipe and clean things up. It will look like a mini me MotoGP bike. :happyb Should be done by the 1st w/e in Feb. Then I start my "Mother of All Tards" (MOAT) project!!! :thumbup This bike will blow your minds!!!!! __________________ Life is either a daring adventure or nothing, so learn how to ride you lazy bastard!

01-16-2006, 01:20 PM	#6
SPEED Administrator Tournaments Won: 2 Join Date: Jun 2004 Location: So Cali Bikes: '07 Honda CBR600RR, Cag Pocket bike Age: 43 Posts: 11,099 iTrader: (5) Rep Power: 16 (42)	Killer deal on this bike!! Hope to see some winning race reports Earl! :happyb __________________ Live to ride another day!" SIGN UP HERE --> "Zoomsplat" -Wingers" SPORTBIKES WEST.COM User Maintenance General Forum Usage Reading and Posting Messages

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-17-2006, 07:01 PM	#7
G-force Junkie Newbie Join Date: Jul 2004 Posts: 65 iTrader: (0) Rep Power: 5 (10)	It sounds like it will look too good to race!